Your company account is blocked and you cannot place orders. If you have questions, please contact your company administrator.

Concrete pipes for open Trench laying with spigot & Bell

KWD0.000
Sold Out! This product is out of stock!

Usage
Concrete pipes are used for:
• Storm drains.
• Sanitary sewers
• Irrigation distribution systems.
• low pressure sewer force mains.
• Treatment plant piping
• Jacked or tunneled systems.
• Ground water recharge systems


Non-reniforced concrete pipes
Pipe
Dia
mm
Wall
Thick.
mm
Outer
Dia
mm
Bell
Dia
mm
Effective
Length
mm
Pipe
Length
mm
Joint
Type
Pipe
Weight
kg
250 45 340 426 1250 1340 spigot & bell 140
300 50 400 496 1250 1340 spigot & bell 195
350 65 480 585 2000 2090 spigot & bell 450
400 70 540 665 2000 2090 spigot & bell 555
450 75 600 745 2000 2090 spigot & bell 685
500 85 670 825 2000 2090 spigot & bell 850
600 105 810 933 2000 2110 spigot & bell 1210
Reniforced concrete pipes
Pipe
Dia
mm
Wall
Thick.
mm
Outer
Dia
mm
Bell
Dia
mm
Effective
Length
mm
Pipe
Length
mm
Joint
Type
Steel
Cages
No.
Pipe
Weight
kg
600 75 750 858 2000 2110 spigot & bell single 900
700 85 870 988 2000 2110 spigot & bell single 1120
800 100 1000 1128 2000 2110 spigot & bell single 1500
900 110 1120 1282 2000 2126 spigot & bell single 1900
1000 115 1230 1410 2000 2126 spigot & bell single 2300
1200 130 1360 1702 2000 2126 spigot & bell double 3200
1400 150 1700 1962 2000 2126 spigot & bell double 4250

Applicable Standards:
1. BS EN 1916:2002 & BS 5911-1:2002
2. ASTM C 76 specifcation for reinforced sewer and storm drain pipes.
(Only on special requests)


International & local approvals:
• ISO 9001 registered frm.
• M.P.W Approval


Quality Assurance:
• Concrete pipe factory has an independent quality control department with
a well equipped laboratory, aided by experienced staff to give the
necessary backup for the quality assurance program.
• Ministry of Public Work’s staff monitor all matters pertaining to the quality
of the products.
• A certifcate of compliance is issued for each production.
reinforcement
• Storm drainage pipes DN 250 to 600 mm are not reinforced as per
B.S. standard.
• DN 700 mm and above are reinforced.


Joints:
• Joints of normal concrete pipes are of spigot and socket type with an
elastomers ring.
• GRP / HDPE lined sewer drainage pipes have in wall flexible joints with an
elastomeric ring.


More Information
SKUCPTL-NIC1
Supplier CountryKuwait
Paint ConditionNo
Thickness (Millimeter) No
WeightNo
Item WeightNo
0 out of 5
Based on N/A ratings
5 star
N/A
4 star
N/A
3 star
N/A
2 star
N/A
1 star
N/A
0% Recommend
Based on N/A recommendations.
Would you recommend this item?
0% of 100
Rate It
Have you purchased this item?